Keystone KSTFA12AAG Use and Care Manual download pdf (Page 2)

User Servicing Instructions

Grasp plug and remove from the receptacle or other outlet device. Do not unplug

by pulling on cord. Open fuse cover (A.) by sliding access cover on top of

attachment plug towards blades. Remove fuse carefully (B.) by gently prying out

the ends of the fuse from the receptacle.

Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

Install replacement fuse (C.) by first placing the end of the fuse into the fuse

receptacle which is opposite of the blades of the plug, then carefully push in the

other end. Only push against the metal end of the fuse, not the glass center

portion. Close the fuse access cover (D.) by sliding the cover back into the plug

until it is completely closed, latches and is flush with the face of the plug.

Risk of fire. Do not replace attachment plug.

Contains a safety device (fuse, AFCI, LCDI) that should not be removed.

Discard product if the attachment plug is damaged.

Know Your Fan

Parts and Features

Height Adjust Button

 Use only when higher position required.

 Pressing the height adjust button, pull the slide

pipe upwards.

 When lower position required, just push the slide

pipe downwards.

You can adjust the height in 2 steps.

Caution:

 Be careful not to pinch fingers.

 Before moving this electric fan, make sure

Height Adjust Button is properly fixed.

P3-14606

P4-14606

1 2 3 4 5

No comments

Keystone KSTFA12AAG Use and Care Manual Page 2